Xbox 360 Wireless Network Adapter Installation: An Overview

Microsoft manufactures a WiFi network adapter for its Xbox 360. This adapter might be stylish, but is extremely expensive. Though the Xbox 360 wireless network adapter installation is quite easy and fast, the cost of the adapter makes it difficult to buy for some customers.

However, as the Xbox 360 does not have an in built network support of WiFi, the user is required to purchase an external adapter. This external adapter would be like an addition to the Xbox. Only an externally attached adapter would make the Xbox network wirelessly. The Xbox 360 network adapter by Microsoft is compatible with almost every home network. The compact sized adapter has a dual band 802.11a/b/g support.

To install a Xbox 360 wireless network adapter, in a 802b/g compatible mode is extremely easy. Two holes are provided at the back of the Xbox 360 in which the wireless network adapter can snap into. The next step is to plug in the USB just above the port of Ethernet. The installation is complete. The adapter would not use any external supply of power. The power is drawn through the USB from the Xbox 360.

As the adapter is small in size, and the antenna is also only a few inches taller, the Xbox 360 wireless network adapter is probably the smallest adapter available. Once the Xbox 360 is powered on, the LED over the wireless network adapter would turn green.

This indicates that a signal has been received by the adapter from the access point or the router. However, if a red light turns on, it indicates that something is wrong with the working of the adapter.

The adapter would then connect to the first access point that is open by default. For configuring the Xbox 360 adapter, the user must navigate to the System Blade. Then click select the network settings and then the Edit settings. If the wireless network has not been selected, then the user must select the Wireless mode to see the list of all available wireless networks.

The next step for the user is to provide an access key. This would assist the user to see the name of the network and the green light next to the link. The signal strength would also show its status at the bottom of the screen. The Xbox live connection is then all set to be tested. After all, once tests have been passed, the Xbox 360 is ready to be used.

Once the Xbox 360 wireless network adapter installation is complete, the user would be able to create an ad-hoc network. Or the user can specify a non-listed network and thus be able to play games on the Xbox 360. So happy gaming!