Wireless Network Installation: An Overview

One of the primary reasons of setting up a wireless network is to get the freedom of moving from room to room or floor to floor and still remain connected. Wireless network installation lets you enjoy the freedom sans mess of wired connection. It enables you to use broadcasting signals of networking.

There are various ways through which wireless network is installed. Some prefer to keep at least one PC connected to the cable. Others may completely remove the snake cables slipping through corners. What ever may be the mode of your connection, wireless in itself implies comfort and flexible use of Internet within the required territory.

Coming back to installation process, the first thing you would require is wireless protocol. There are various protocols but the mostly 802.11b is widely used. This is also preferred by the computer manufacturers. After that, you will need transmitting point to be set up called access point. Access point can be kept in a PC or can be installed with the help of routers.

The access point requires your broadband connection wire for getting connected and then transmitting signals of through the antenna. You can set up wireless connection with any service. It can be either DSL line or Ethernet or Cable connection or a dial up modem.

Now while placing the access point, it is important to choose a perfect place so that all the computers you want to connect get the optimum signal to keep up the speed of work. You can mount it to a higher place if you want. Keep it away from telephones, microwaves and other electronic devices from the access point or the router to defy interference.

Once the job of the access point is done, your attention shifts to computers. You must facilitate the PCs or laptops so that they can access the wireless network. For that, you will have to fix wireless adapters which can receive signals. If your computers have inbuilt adapters, you won't require external ones.

Once your installation and software updates are complete, you must test your installation. There are tools that can help you detect the strength signals. Tools like Yellow Jacket or AirMagnet will detect the signals and indicate the compatibility of the service. If the coverage is not satisfactory, you must readjust the access point. Alternatively, you can add additional points for strong signals for all the systems.

The last job in WLAN is to ensure security. Always pay attention to security threats. The network name and administrator password of your wireless network installation should be strong. This is so that hackers or intruders cannot misuse your connection for illegal acts. Once all these measures are done you are ready to go!